1 / 7
Overengineered Pi 5 Open Frame — image 1
1 / 7

Overengineered Pi 5 Open Frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An open frame test bed for Raspberry Pi 5 (and optional bottom hat)

Rating
0 / 5
Likes
5
Downloads
22
Makes
0
Views
179
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v3.0

An open frame test bench for a Raspberry Pi 5 and optional bottom hat (mine is a Pineberry NVME)

I have designed the sled to be used in several ways, one being this test bench. It uses heat press inserts to ensure the Pi is well held down. The heat sets are for the Pi - M2.5 4mm deep, 3mm 4mm deep for sled to stand, and finally M4 4mm deep for the fan.

Pi to Sled - M2.5 by 6mm for just Pi, M2.5 * 12mm for Pineberry and Pi (needs spacers to hold the Pineberry and Pi at the right distance).

Printing - Supports on sled, used normal and snug which worked well. Frame does not need supports. 

Photos show sled printed in eSun PETG Grey and the stand in Overture PETG Orange. PLA would be fine. Fan used is the Noctua NF-A4 10mm 5V 40mm. 

STEP files included for remixing.

Tags