Hose clamp for 4x6mm aquarium air hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hose clamp to manipulate the output of air hoses, specially designed for 4x6mm hose
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 193
- Makes
- 1
- Views
- 723
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
To manipulate the output of the air hoses of my air pump I have designed this hose clamp. It consists of three parts: frame, screw and cap. After screwing the screw through the frame you can screw on the cap. You turn the screw with your hand or a screwdriver.
It is recommended that you print with 100% infill and the frame lying on its side. I have used my Neptune 4 and PETG for a little flex but you can also use PLA and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| Amazon Basics | Amazon |
| GEEETECH Filament PLA | Amazon |
| ELEGOO PLA+ | Amazon |
| eSUN PLA+ | Amazon |
| JAYO PLA+ | Amazon |
PETG | |
| eSUN PETG Filament | Amazon |
| OVERTURE PETG Filament | Amazon |
| ERYONE PETG Filament | Amazon |
| SUNLU PETG Filament | Amazon |
| Polymaker PolyLite PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| extrudr® XPETG | Amazon |
| TECBEARS PETG | Amazon |
| GIANTARM PETG | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
| eSun ASA | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!