Artistic Wind Spinner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garden Wind Spinner with floral patter top and bottom. Only the Sphere with the wings spin, top and bottom does not.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 47
- Makes
- 0
- Views
- 688
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
So, I made this Sphere in practice, wanted to use it for the contest, easy right…
Still very new to designing, it turns out, i knew little of Wind Spinners, and even less about their Aerodynamics.
Still dont, but i got there… Somehow… I give you this masterpiece of a Garden Wind Spinner…
Wings somewhat inspired by Helical Savonius rotor blades, design purely freestyle.
Floral top and bottom pattern.
It does require a fair amount of wind to get going, but then it does pick up good speed.
It gets better with use, but for a start i gave it some lubrication.
The top piece helps stabilize, but dont overtighten it.
1x SPINNER:
2 parts in 1.
0.2mm, 3 walls, 7% "Gyroid" Infill.
Support under spinner IS A MUST, "Grid" with 40% "Threshold Angle", "On Build Plate Only".
Print time was 5 hours 40 min.
100mm x 100mm x 108mm.
1x TOP PIECE:
Does NOT need Support.
0.2mm, 3 Walls, 10% "Gyroid" Infill.
Print time was 1 hour and 25 mins
110mm x 110mm x 54.6mm.
4x WINGS:
0.2mm, 2 Walls, 10% "Gyroid" Infill.
Does NOT need Support with good cooling.
Print time was 1 hour.
63.67mm x 103.22mm x 14.3mm
1x GROUND SPEAR:
If a taller Spear is needed, print more than one.
Does NOT need support.
0.3mm, 3 Walls, 50% "Gyroid" Infill.
Print Time was 1 hour.
20mm x 20mm x 118.7mm.
1x GROUND SPEAR TIP:
0.3mm, 4 wall.s, 50% "Gyroid" Infill.
Needs support. "Snug" with 40% "Threshold Angle". Thread down.
Print time was 35min.
20mm x 20mm x 78.88mm.
Sliced with Orca.
Everything was printet in Elegoo Rapid PETG, on my K1 Max.
My total print Time: About 9 hours
NO other parts needed. Everything screws together, the wings are press fit.
If you want to mount it to something else, the bottom thread is "M10x1.5".
There is no guarantee, that items like this, made for a contest, or any item will stay free…
Changes can happen at any time, so grab it while you can, and I would love to hear your experience...
Also be so sure to download the files fresh, if you decide to print...
Personal Use Only... Contact me, if you have other suggestions...