LED mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY holder for old stock intel CPU cooler with 7,5x7,5 cm mounts. instructions: 1) put wire thrught holder 2) put…
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 51
- Makes
- 0
- Views
- 934
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
DIY holder for old stock intel CPU cooler with 7,5x7,5 cm mounts.
instructions:
1) put wire thrught holder
2) put thermal paste on the cooler/LED chip
3) place holder in the center of cooler
4) twist holder way that it locks under the stock mounts of the cooler
5)MAKE SURE LIVE WIRES ARE NOT TOUCHING THE HEATSINK!!!
I strongly recommend using thermal paste and fan, becouse it gets really toasty after a while (especially the more powerful ones).
better to print from temperature resistant materials.
If you want to remix here is link to the fusion360: https://a360.co/2CrPdJx
Print Settings
Printer:
ender 3
Rafts:
No
Yes
Resolution:
0,4
100
Filament: miroluk pla black
Notes:
DIY holder for old stock intel CPU cooler with 7,5x7,5 cm mounts.
instructions:1) put wire thrught holder
2) put thermal paste on the cooler/LED chip
3) place holder in the center of cooler
4) twist holder way that it locks under the stock mounts of the cooler
5)MAKE SURE LIVE WIRES ARE NOT TOUCHING THE HEATSINK!!!
I strongly recommend using thermal paste and fan, becouse it gets really toasty after a while (especially the more powerful ones).
better to print from temperature resistant materials.
Category: Electronics