1 / 4
HSW mount for Bosch AL-1830-CV
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW mount for Bosch AL-1830-CV
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Honeycomb storage wall (HSW) mount for the Bosch DIY/Gardena AL-1830-AL charger.
When slicing from STL, put the object with the HSW holders facing top. You will need two instances of the part.
Print settings:
- Support is only required below the end of the bars.
- Tested with PETG, but PLA should work as well. I used PETG as it could get warm in my garden shed.
- I printed with 20% Gyroid infill, but I guess 15% Grid will work also.
Assembly instructions:
- Print two parts of the mount plate
- Place them with the longer part of the screw hole to the outside of the charger (see picture below)
- Use 4 M3x20 screws to replace the original screws and attach the mount plates to the charger.
Disclaimer: This is my very first model I uploaded to Printables. I am open for any comments, suggestions, improvements for the model itself and the model description as well.