1 / 4
HSW mount for Bosch AL-1830-CV
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSW mount for Bosch AL-1830-CV
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Honeycomb storage wall (HSW) mount for the Bosch DIY/Gardena AL-1830-AL charger.
When slicing from STL, put the object with the HSW holders facing top. You will need two instances of the part.
Print settings:
- Support is only required below the end of the bars.
- Tested with PETG, but PLA should work as well. I used PETG as it could get warm in my garden shed.
- I printed with 20% Gyroid infill, but I guess 15% Grid will work also.
Assembly instructions:
- Print two parts of the mount plate
- Place them with the longer part of the screw hole to the outside of the charger (see picture below)
- Use 4 M3x20 screws to replace the original screws and attach the mount plates to the charger.
Disclaimer: This is my very first model I uploaded to Printables. I am open for any comments, suggestions, improvements for the model itself and the model description as well.