Gridfinity stackable box for Bosch Pick and Click bitholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Gridfinity bins to click the Bosch Pick and Click modules / trays inside. The 2x2 Version is needed for long bits. The bins are ‘4u’s heigh and stackable.
It's a very tight fit, so there's a hole in the bottom (to get them out if they are stuck) and in the left side to fit the tray inside. Even a 0.4 wall was too much and the tray wouldn't fit.
The color change i did was at the 130th layer (printed with 0.2mm layer height).
NOTE:
o In version 1.0 i made a mistake in the model. In 1.1 it's fixed.
o The Pick and Click bin, which needs two slots, doesn't fit! It just slides out.
It's slimmer than the bit trays and i can't figure out what's the difference beteween my design and Bosch's…. If you figure it out, please let me know!
o I don't have the round drill bit insert, so i couldn't test the model with these.
I provided the following versions, if you need others, let me know :)
1x2 ( 1 tray )
2x2 ( 2 tray )
3x2 ( 3 tray )
4x2 ( 4 tray )