Sturdy Print-in-Place book stand with page holders V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New version of my old book stand. It keeps the book from closing.
- Rating
- 5 / 5
- Likes
- 106
- Downloads
- 280
- Makes
- 0
- Views
- 1,402
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Important information before printing
This is a print in place desing, and it's specially designed to be printed with specific parameters, so the hinges work properly.
Layer heigh: 0.2
You'll need:
2 x M5 x 10 mm flat head screws to put them in place. (if you don't have any M5 screws, M4 inserts and M4x8 screws should works too)
Printed in an Ender 3 (bed size: 235 x 235 mm)
Used printing settings
0.2 layer heigh
4 top layers (for better surface quality)
3 bottom layers
3 wall layers (5 gives a better top layer quality. Infill doesn't show through)
20% infill (gyroid)
I don't recommend using supports or rafts. Supports are not needed. Due to the size of the model, rafts are not needed, a good bed leveling should be suffice.