Original Grimmlys Kobra 3 Combo Lighted/Non-Lighted Marquee
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A marquee with 11 letter spaces to spell out whatever you want. Can use lighted or not lighted with color letters.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You can print the letters in colors if your not going to use the Light Bar. If you are going to use the Light Bar I would print in clear filament.
Have fun with the spelling of whatever it is you like. I hope you use and enjoy it as much as I do.
Please use following settings:
--------------------------------------------------------------------------------------------------------------
Print Speed: I printed first layer and infill speed 20, then 100 speed for sparse infill using GRID pattern.
Nozzle: 250
Bed: 75
Fan Cooling: 30 percent
Cooling: no cooling for the first 8 layers
Supports: yes
Brims: no (only on the Light Bar in 5)
Filament: PETG - recommend Elegoo Rapid PETG
--------------------------------------------------------------------------------------------------------------
To make it lighted, you can purchase the USB LED cob strip with a off button. Length 1M for $3.72 and up in either white or colors on AliExpress.
Directions for Light Bar is easy, the cob LED slides in the Menu bar with the USB cord coming from the right side of the Light Bar. ( you can use glue on back of the bar to keep it in place but it should fit snug ). Cut length of cob LED to 190mm from end of the cable.
Light Led for the LED Bar: 5V COB LED Strip Neon Light USB Power Waterproof Silicone Tube Lamp Flexible LED Ribbon 320LEDs/M High Density Linear Lighting - AliExpress 39
Insert the Light Bar into the Menu Board
