FrSky RX6R receiver housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a protective shell for the FrSky RX6R receiver.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a protective shell for the FrSky RX6R receiver.
It only has openings for the top connector cables (PWM outputs are completely covered and can not be used!). The bind button and receiver LEDs are both visible and accessible. The cable connector fits through the port protector at the top perfectly.
You need two m2x10 screws and nuts to close the housing.
Print Settings
Printer Brand:
Bambu Lab
Printer:
A1 Mini
**Rafts:**
Doesn't Matter
Supports:
No
**Resolution:**
0,4mm
Infill:
Gyroid, 15%
**Filament:** sunlu PLA white
Notes:
Print the upper part at 45° on the edge of the port protector and you don't need any supports.
Category: Electronics