200mm Drone Frame Vertical Stretch V3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical 200mm Quad Frame. Using PTEG frame Weighs 73 grams not including Hardware. Uses 5" props and 2000 series
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 136
- Makes
- 0
- Views
- 829
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Vertical 200mm Quad Frame. Using PTEG frame Weighs 73 grams not including Hardware. Uses 5" props and 2000 series Motors. Print 2 Side Frames, do not mirror, Bolt together with 2- 3mm x .5 x 35mm Socket Screw with 3mm and 4- 3mm x .5 x 8mm Screw. Press in 6- 3mm nuts. Please post comments or ideas.
This is an untested design, I will gladly share Fusion360 file. Design could actually be printed in one piece on newer printers, I did in sections so if one arm gets broken it could be replaced. Thanks
Print Settings
Rafts:
No
Supports:
No
.2
Infill:
25%
Notes:
PTEG or ABS 1.75mm bottom and top layer, 2mm walls
Category: R/C Vehicles