1 / 6
Print-in-place Hinged Case for Ruthex Style Soldering Tip Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small box to hold the 8 brass parts for heat-insert soldering iron tips.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 39
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The set of insertions tools I purchased online came in a simple plastic box, so I decided to make this print to keep the parts better organized.
Print Instructions
Print in PLA using the 3mf files provided, otherwise :
- 0.2mm layer height
- 2 perimeters
- 15% grid infill
After printing and removal from the print bed, flex the hinges very slightly and then slowly increase the amount of flex to work the hinges free.
Optional : Put some foam rubber in the lid (see photos) to keep the brass pieces in place inside the box.
CAD
The OnShape 3D CAD files for this are here :