Anboks I1 - Smallest 3D Printed Case with 6900XT + 5950X - 7.8L
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print PC case which with optimized design for exactly my components.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
An easy to print PC case which with optimized design for exactly my components.
196x70x320 on front side (CPU, Motherboard, PSU)
170x65x320 on back side (GPU)
Hopefully others will also find it useful. Due to flat printing without top and bottom, all sides end up with no visible layer lines. This makes for a beautiful end result and less filament used.
6mm spacers or standoffs are needed for the motherboard.
When connecting split parts best to use superglue so they fuse together as if they were single print.
6 legs2 are needed. leg3 is optional and can replace 2 leg2 legs.