Drain strainer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.22 – €1.50 net (excluding VAT)
For file: StrainerPrint_TN.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.36 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A strainer to catch food scraps from falling down the drain and clogging the sink
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 92
- Makes
- 0
- Views
- 412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
If you found that the strainer doesn't fit completely with the drain (too small), please print along with the sleeve and put it on the outside of the strainer for better fit.
They were successfully printed with PLA. I recommend not pouring hot water down this strainer if it is not printed with thermo-resistant plastic or if you will I would recommend printing one with a thermo-resistant plastic to ensure better longevity.