1 / 7
Stand/Station for Zerno Z1 and Decent Portafilter (auto centering on Z1) — image 1
1 / 7

Stand/Station for Zerno Z1 and Decent Portafilter (auto centering on Z1)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Automatic centering portafilter stand & tamping station for Zerno Z1 Grinder and Decent Espresso bottomless portafilter

Rating
0 / 5
Likes
5
Downloads
38
Makes
0
Views
279
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This is my solution to a portafilter stand for Zerno Z1 using the Decent Espresso portafilter. 

 

Auto centering

Although optional it allows to insert a 12x3 magnet, (mine actually measure ~ 11.92x2.8) which centers the portafilter perfectly on the Zerno.

 

Funnel supported

It is designed to work with a Funnel with a height up to 30mm, which really is required with the Zerno Z1.

 

True level

For the best experience it is designed to provide true level with the Decent Espresso Portafilter, perfect for WDT and tamping.

 

Printing

It is provided as two parts, where the lower part (the 0.4mm thin “plate”) is optional. It is supposed to cover the magnet, I've used Extrudr FLEX Semisoft for this plate and then continued the print with Extrudr GreenTec Pro.

Using multi materials with a magnet requires two pauses, it's best to figure this out using your slicer. First pause after the thin plate, about 0.4 mm (pause before layer 4), second pause just before the magnet get's covered by filament.

My print settings:

  • Extrudr FLEX (TPU) Semisoft for the first 3 layers (0.2 + 0.12 + 0.12 = 0.44 mm)
  • Extrudr GreenTec Pro from layer 4
  • Nozzle: Hardened steel 0.4 mm
  • Initial layer height: 0.2
  • Layer height: 0.12
  • Ironing: Concentric, top surfaces
  • Walls: 3
  • Top surface and bottom surface: Concentric
  • Bottom shell layers: 6
  • Top shell layers: 6
  • Infill: 20 % Gyroid
  • Prime tower, no flush into objects

I'm using an X1 Carbon, due to the TPU material I can't use the AMS for printing, unfortunately.

Important notes

  1. When printing with different materials don't forget to keep the print bed temperature at the same setting required for the material on the print bed when switching to a different material.
  2. Measure your magnet, I've designed the spot to be very tight/snug fit. It is 12.1x2.9, that fits my “12x3” (actually measure ~ 11.92x2.8) perfectly with my X1 Carbon printer. If yours are different, let me know. Also consider that the X1C is a pretty good calibrated printer.
  3. Might work with other (non Decent) portafilters as well

 

Tags