Counting matching models…
I found the original opening for the portafilter to be too small, and I wanted a way to include my WDT Tool as part of it. I have left these as .3mf files so the openings/etc can be easily tuned as needed. I used Dacy's tray and storage…
Simple stand for portafilter. I use it for all work with portafilter (grinding and tamping) Also useful for small cups during brewing when you turn it upside down. For honeycomb texture use mod file Link for funnel
Coffee Tamping Station 54MM Tested on Breville Bambino Tamper Station made for this tools: ARO Orbit PRO https://www.amazon.com/dp/B0DK63L3JW 54mm Bottomless Portafilter https://www.amazon.com/dp/B0DK11HW3X ARO PortaFunnel…
The excellent Alphabet Stamps for Clay Stamping by Colleen Jordan were great, but for writing in Danish, extra letters were required. The friend using them also requested an ampersand. Therefore, I've slightly increased the height of the…
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
This is my attempt to improve Almondtofu's wonderful Coffee Block modular tamping station system. The main change is replacing the locking tabs on the blocks and side panels with female dovetail slots. These are then attached together…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
A remix of Colleen Jordan's Alphabet Stamps for Clay Stamping, these are the French accents for the letters A E I O U. Un remix de timbres d'alphabet de Colleen Jordan pour le tamponnage de l'argile, avec les accents français pour les…
I added some fuzzy skin to the O.D. to give it some texture. It functions very well.
Printer: Prusa MK3S+ Filament: Elegoo PLA+ Infill: 15% Time: 3H10M
Out of the box, the Decent Tamping Cradle does not fully support the handle of a portafilter. This severely limits the utility of the cradle for puck preparation, since you need an extra hand to hold the portafilter level. This device…
This part was designed to replace the original inset piece supplied with the tamping station. The stock piece on my unit was not usable, so I modeled and printed a functional replacement. The fit is not perfect, but the printed part…
Designed for 51 mm 2 ear portafilter (model V1). You can also print V2 model (without cutouts), which is suitable for 2 ear ane 3 ear portafilter. Tamping station can be also used upside down for prepairing the puck in 51mm filter basket.…
Inner diameter of the model: 61.5mm Top fill pattern that works well: Archimedean chords
I really liked the idea of that simple tamping station but my umikot has long tabs (for protecting the needles). so I extended the cutouts to fit. another change i did was to change the angle of the handle support to better fit the lelit…
Added a WDT tool hole in the center of the dosing funnel spot.
I initially designed this to raise my cappuccino cups up higher to prevent splashing espresso all over my kitchen counters, and added slots to hold the portafilter afterward. It will hold the portafilter for a Breville Bambino with three…
I have a set of 36 steel stamps that were challenging to use without a labeled organizer so I made this one. I wanted to space them out far enough to quickly and easily pull them out. I got the steal stamps here:…
Delonghi Dedica 51mm Portafilter Tamping stand (flat base)
Tamping station to hold bottomless portafilter flat while tamping. Indentations on the bottom are for magnets that will line with my modular tamping station. Portafilter used was the LILQ 54mm Bottomless Naked Portafilter with the Walnut…
Everything has its place in this modular set! Works with a variety of 54mm accessories, but was designed for: Front: Timemore Black Mirror Nano Scale, RDT Bottle' Middle: Normcore 54mm V4 Spring Tamper, MHW-3 Bomber 54mm Blind Shaked,…
a simple tool to support thr base of soft clay objects whilst stamping. Prints without supports. can be scaled.
Create crisp, modern impressions in clay with this Clay Letter Stamping Set - Noto Sans ! Perfect for potters, ceramic artists, and DIY enthusiasts, this toolset allows you to effortlessly add clean, contemporary text to your clay…
Create crisp, modern impressions in clay with this Clay Letter Stamping Set - American Typewriter ! Perfect for potters, ceramic artists, and DIY enthusiasts, this toolset allows you to effortlessly add clean, contemporary text to your…
This is a stand I designed for the Breville 58mm Bottomless portafilter so it is easier to tamp it. Category: Kitchen & Dining BE SURE TO PRINT WITH FOOD-SAFE MATERIALS AND A FOOD-SAFE NOZZLE LIKE STAINLESS STEEL
I finaly made a circular blocks for making a text in a circle with my printing-press. Here are 2 variants one smaller and one bigger- for longer texts. They both have a peephole to be able to see if you are stamping right where you want…
I found the original opening for the portafilter to be too small, and I wanted a way to include my WDT Tool as part of it. I have left these as .3mf files so the openings/etc can be easily tuned as needed. I used Dacy's tray and storage…
The stock Normcore / Espresso Compact Tamping station is only compatible with 51/54/58mm barista accessories. This insert adapter allows compatibility with up to 59mm accessories; my accessories are 58.5mm including a Normcore’s V4 tamper…
Knodos's V3 Tamping Station has an obnoxious habit of letting bottomless portafilters tip out. This print let's you replace the existing support with one that will contact the portafilter further out underneath it's center of balance to…
A simple tamping pad for use while making coffee. Protects your counter or tabletop from scratches, dents, chips, dings, etc. I printed in Overture TPU 95A with a 0.6mm nozzle @ 0.3mm layer height with 100% infill. I'm sure it would work…
Sage Bambino Tamping station 54 mm with 3 puck screen, i needed space for puck screens.
Heyho I have recently designed a portafilter holder for my Superkop espresso machine. And I am super happy with it! I have now also integrated a height-adjustable handle holder so that the stand also works for other portafilters of the…
Quite a while ago I designed this minimalistic portafilter holder for my Superkop espresso machine. I still use my first prototypes and they just work flawlessly. Also the machine is still superb! The holder is designed to hold your…
The perfect tamping station with a non-slip TPU bottom (glue on) for stability. Designed at the ideal height for stock Breville/Sage Barista Express portafilters (53mm). As seen in the pictures, the filter rests on both the 3D-printed…
A simple funnel for 49mm baskets that are used by the Olympia Cremina or older La Pavoni models. The funnel sits well on my 14g baskets without the need for magnets. It allows for WDT and tamping for minimal mess in the kitchen :) Printed…
Print in the highest layer height speed profile available for your nozzle. No support. 3 Perimeters, 20% gyroid infill for stability. Leave a comment here now, to let me see if you like it or not! You want to support my work? Do it here:…
Update 7/5/2025 I really appreciate all the support and attention you've all given to my work. I wanted to make something that would be useful for a lot of people, and the response has been far greater than I ever expected. That said,…
I wanted to fix an issue I had when trying to use the Bookoo WDT Tool with the Ninja Cafe Luxe portafilter due to its unique dimensions. This project is intended to make a version of the funnel and portafilter holder that will work with…
Coffee Tamping Station delonghi dedica. Usea 0.2 mm layer height. print without filling, stop the print at layer 75 and insert iron screws or iron material inside, to be able to support the filter holder stable in its base. The cap…
0.3MM Layer, 15% Infill (Or Higher) - No Support/Brim Required. PLA is preferable for food related prints. 3MF Files Prepared for PLA. Commercial (Optional) Parts Required : QTY-3, 5MM Diameter X 1 MM Thick Magnets : https://amzn.to/3s8MGA7
“I wish that we could keep our kitchen counters free of stray coffee grinds,” my wife mentioned one day. We make coffee several times a day, and despite wiping down the station each time, we had trouble preventing small amounts of grounds…
Keep your coffee setup organized and your workspace clean with our Coffee Tamper Mat Stand . Designed to securely hold your portafilter, tamper, and accessories, this tamping station provides a stable and convenient surface for consistent…
This is a compact tamping station that puts espresso prep tools within quick and easy reach. It keeps me from fumbling for stuff and also tucks away neatly. Combine with a small leather mat as the prep area to complete the setup. Printed…
This model is able to fit both the standard Gaggia Classic portafilter as well as the popular bottomless one. This is useful it you often use both and you don't want two different tamping stations laying around. Printed on an old Ender 3…
Simple stand for portafilter. I use it for all work with portafilter (grinding and tamping) Also useful for small cups during brewing when you turn it upside down. For honeycomb texture use mod file Link for funnel
Coffee Tamping Station 54MM Tested on Breville Bambino Tamper Station made for this tools: ARO Orbit PRO https://www.amazon.com/dp/B0DK63L3JW 54mm Bottomless Portafilter https://www.amazon.com/dp/B0DK11HW3X ARO PortaFunnel…
The stand is designed to work with the popular 9 prong WDT tool by jkim_makes . The simple version holds only the WDT tool and a dosing ring/funnel. The basket dummy ring should fit any 58mm dosing ring/funnel, but I highly recommend my…
These tamping stations give you a nice compact spot for your portafilter, tamp, and funnel, and work with bottomless and spouted portafilters. There is also a 1-hole version for just a portafilter in case you have a silicone tamping mat…
A minimalistic tamping base for the IKAPE 54mm Bottomless Portafilter. Printing Instructions: Layer Height: 0.2mm Perimeters: 3-4 Infill: 15%
I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…
Simple tamping station for a 54mm portafilter. Tested with both a Pesado 54mm portafilter and normcore tamper as well as the original Breville 54mm portafilter and tamper.
There are a lot of tamping stations on Printables but I was looking for one I could put in a drawer and take out (easily) when I need it so I made one that would be short enough to fit in the drawer and includes a handle. The handle…
Portafilter tamping station in two variants — for basic portafilter or with unscrewed spout (pic3)
This is a circular jig/guide for use with 6mm steel punch sets (3mm letters and numbers). It has 2 digits at the top, with 10 digits below in a circular pattern. The punch set I use is here (OWDEN 36pc steel metal stamping tool set,…
This is designed to support WDT tools of all types while still being able to let the porta filter rest on the table flat. I posted the model of this portafilter here if you want to make your own stands.…
Combining two crafts: 3D printing and leathercraft. With these stamps, a debossed effect can be created in vegtan leather. But with the handle, you can use the same plates with an ink-pad. The plates can be printed without support, face…
The Normcore Palm Tamper Mod ________________________________________________________________________________________________________________ This model is for those who like their Normcore V4 tamper, but would like to make it more…
How It Works| Youtube Video ✨ Introducing our 3D toilet paper stamps , available in 10 delightful designs! 🚽✨ These stamps are incredibly easy to use : simply attach them to your faucet, run water for a few seconds, wipe off any excess…
This is a leveling tool to be used with the original tamper of Cafelat Robot espresso machine. I've measured my tamper and the handle diameter is 26.3mm. I believe all tampers have the same dimensions, but you can check yours to make…
This is a parametric FreeCAD design for a tamping stand. It has working dimensions for a current (2022) Breville, an older Breville, and a Gaggia classic portafilter, but you can add others. Basic idea came from another design here on the…
Simply put its a TPU base that can be printed and slipped onto the bottom his the tamping station. The idea it to give the base more traction when compressing grinds and also be gentler on working surfaces. I'll also Add the CAD file in…
Minimalistic tamping station for the Gaggia Classic portafilter. This is an improved version of Jason's design, with more space for the portafilter and rounded corners at the handle cutout.
A funnel to make sure your balls go into the hole. A tamping tool to make a nice even surface area for your tempest and dynavap flower. A case to store and protect the best portable baller around.
Now slightly higher and a TPU bottom that doesn't need glue.
The model is made for ISO 7093 M8 washers and quadratic 6mm punch stamps. A little notch on every part provides a place to put seams in. Make sure your slicer's setting for “ Z Seam Alignment ” is set to “ Sharpest Corner ”. This makes…
Simple tamping station for Breville Barista Touch 54mm portafilter. Might work for other 54mm portafilters, but did not take different heights into account. Includes storage space for funnel and tamper. No supports or special print…
The excellent Alphabet Stamps for Clay Stamping by Colleen Jordan were great, but for writing in Danish, extra letters were required. The friend using them also requested an ampersand. Therefore, I've slightly increased the height of the…
I designed this tamping and accessories station to bring some order and style to my espresso workflow, specifically for use with my 58mm bottomless portafilter . This organizer solves the problem of a cluttered counter by providing a…
One M4x25 screw is required. After adjusting the height, you can use the 'M4_Head' part to cover the screw.
designed to fit a 15mm paint marker such as https://amzn.to/3FXhHL4 watch the video: https://youtu.be/tlGphhJCDgw Copy the design from the source on Tinkercad: https://www.tinkercad.com/things/86cdfBx8iHt-stamp-markers Printed in PLA and…
Anothere LaPavoni tamping station for premilenium portafilters (49mm). I needed to fit in little longer due to single spout setup which goes deaper than oridinal double spout from La Pavoni. Printed in ABS with 15% gyroids infill, works…
A modified version of the Rancilio Tamping station to fit the 20-112-030 portafilter used with the Rancilio Nancy, Audrey, and Kathy machines. Category: Kitchen & Dining
Inspired by one for Rocket posted by TOP11. TOP11's inner diameter was too tight for Rancillio, so I designed this one. It is perfectly sized for Racillio 58mm portafilters. It provides a firm base for Tamping. And has sufficient depth…
Needed a tamping station and i didn't find anything that could fit the Normcore 51mm 3 ears for my coffee machine. So i had no choice to modelize one for me at least :'-( A remix / Inspired from…
Needed a tray to go in front of my barista express to catch grounds and drips, give a soft surface for tamping, and to just tidy up the countertop. This design fits the bill nicely. Tucks under the front lip of the espresso machine.…
Printed in PLA, no supports needed. Super simple design. Designed to hold Stampin Up blocks A, B, C, D, E, F, G, H, and I. (Standard of 20 mm of depth for the blocks) Block A: 30 mm x 32 mm Block B: 41 mm x 49 mm Block C: 51 mm x 57 mm…
This tamping station provides enough clearance for a single-spout portafilter. Print works fell with ABS and ASA so it doesn't meld with a hot portafilter.
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
Realiza tus creaciones con este juego de estampado de texturas de construcción. Mira el video para más ideas creativas: https://youtu.be/EHzKaRmSnVY
The block contains two compartments for filter baskets – 27×63 mm and 25×62 mm – and two compartments for puck screens with dimensions of 53×2.5 mm. Printed of PLA, infil 5%, perimeters: 2
Washer stamping jig specifically for M14x28x1.5 brass sealing washers. Jig utilizes a 3mm centering hole that can be drilled into the washer using the included drilling jig. The hole precludes using 2 spaces. This no-stamp zone is…
This is a stand for holding a moka basket, a dosing funnel and a tamper. This works with my Geesta Premium Crystal 4-cup pot which has a basket inner diameter of approximately 53.5mm. You may need to scale it horizontally and/or…
An espresso tamping station with a rest for a standard 58mm portafilter, storage slot for your tamper, and a hook on the side to hang a dosing funnel. (The tamper slot is 59mm diameter and has an open bottom, so it won't collect grounds.)…
Tested on Bambu Lab A1. Used adaptative cubic and 80% density. Worked great on leather.
This is my attempt to improve Almondtofu's wonderful Coffee Block modular tamping station system. The main change is replacing the locking tabs on the blocks and side panels with female dovetail slots. These are then attached together…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Tamping for Espresso Oster Xpert Perfect Brew 58mm No support needed Should be printed with PETG to get stronger part, but can be printed with PLA too. Model is a remix from breville version Breville holder or tamp stand by dpat134 -…
A remix of Colleen Jordan's Alphabet Stamps for Clay Stamping, these are the French accents for the letters A E I O U. Un remix de timbres d'alphabet de Colleen Jordan pour le tamponnage de l'argile, avec les accents français pour les…
This tamping stand suits a specific 54mm bottomless portafilter I bought on AliExpress (to suit a Breville espresso machine). The portafilter still appears to be available for purchase in 2022. I've included a picture of the portafilter…
I added some fuzzy skin to the O.D. to give it some texture. It functions very well.
A sturdy and functional tamping stand designed specifically for Breville (Sage) Touch espresso machines. Provides a stable platform for consistent tamping. Printing Details: Material: PETG (or PLA) Infill: 20% Supports: Not required
Printer: Prusa MK3S+ Filament: Elegoo PLA+ Infill: 15% Time: 3H10M
