Ikea Batskar (BÅTSKÄR) Leg Reinforcement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea BÅTSKÄR leg reinforcement to be able to mount wheels and hold the weight of a gozney dome.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 86
- Makes
- 1
- Views
- 1,287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Ikea BÅTSKÄR leg reinforcement to be able to mount wheels and hold the weight of a gozney dome.
The video probably explains best how it works: https://drive.google.com/file/d/1EPvcd3F1K8oWjecm6nUqga08nSA9Reul
So far everything holds quite well. However, as the feet are stressed quite decentrally by the wheels, only time will tell how good the construction is.
I got myself these wheels: https://www.amazon.de/dp/B0BWN2H7DC
and reinforced the bottom part with these hex nuts: https://www.amazon.de/dp/B0C13LQY1R
To do add the nuts, I paused the printing before layer 143 (layer height: 0.16 mm) and inserted the nuts. Before doing this, I coated the top of the nuts with build plate glue so that the next layer would stick to the nut.
Printer setting (Bambu Lab p1p):
filament: PETG-CF
layer height: 0.16mm
wall loops: 4
bottom & top shell layers: 6
infill density: 25%
printed upright. the upper part upside down.