Ikea Batskar (BÅTSKÄR) Leg Reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea BÅTSKÄR leg reinforcement to be able to mount wheels and hold the weight of a gozney dome.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 1284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Ikea BÅTSKÄR leg reinforcement to be able to mount wheels and hold the weight of a gozney dome.
The video probably explains best how it works: https://drive.google.com/file/d/1EPvcd3F1K8oWjecm6nUqga08nSA9Reul
So far everything holds quite well. However, as the feet are stressed quite decentrally by the wheels, only time will tell how good the construction is.
I got myself these wheels: https://www.amazon.de/dp/B0BWN2H7DC
and reinforced the bottom part with these hex nuts: https://www.amazon.de/dp/B0C13LQY1R
To do add the nuts, I paused the printing before layer 143 (layer height: 0.16 mm) and inserted the nuts. Before doing this, I coated the top of the nuts with build plate glue so that the next layer would stick to the nut.
Printer setting (Bambu Lab p1p):
filament: PETG-CF
layer height: 0.16mm
wall loops: 4
bottom & top shell layers: 6
infill density: 25%
printed upright. the upper part upside down.