Orbiter v2 Ender 3 v2 direct drive mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Orbiter v2 Ender 3 v2 direct drive mount inspired by the original E3 SpeedDrive mod
- Rating
- 4 / 5
- Likes
- 32
- Downloads
- 143
- Makes
- 2
- Views
- 1,132
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Orbiter v2 Ender 3 v2 direct drive mount inspired by the original Ender 3 SpeedDrive mod. Made for my Ender 3 V2 and should work on Ender 3 / 3 Pro except one of (extra) hole in the hotend gantry plate will not be accessible.
I am using it with a Satsana remix duct with a 5015 fan for a nice modular toolhead.
Print it oriented with the holes for the spacers facing the print bed to make sure those are as round as possible. It will still be very tight to get the spacers in, use a vice, pliers or hammer if needed..
Printed in PLA with 50% cubic infill, 0.2 layer hight, 4 walls and 5 layers top/bottom.
71 mm ptfe tube with the stock hotend.