1 / 3
XL Buddy Board Cover 60mm Fan — image 1
1 / 3

XL Buddy Board Cover 60mm Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the Surfalex2000 cover, but for a 60mm fan

Rating
5 / 5
Likes
18
Downloads
114
Makes
2
Views
569
Reviews
3

Updated at source:

Model information

License
GNU General Public License v2.0

The opening is designed for a 60mm fan, with a center-to-center distance of 50mm between the mounting holes. 

One advantage of using a 60mm fan is that the screws protrude into the empty space above and below the circuit board, reducing the risk of accidentally shorting any components.

I used a 24V Filter Fan ("Fan SL1/S, CW1/S" sold by Prusa", and connected it to the 24V terminal on the board. 

I also installed an On/Off switch, which is accessible from the front of the printer as I only need the fan during parts of the summer. https://www.printables.com/model/988553-on-off-rocker-switch-housing 

Suitable screw size is 25x3 mm (4 screws), given a fan thickness of 15 mm.

There are two options for the board cover:

Option A: Similar to the original design, where you screw a 3mm screw directly into the plastic, hence there is an added boss to the cover to add material to screw in.
Option B: Features a flat surface, allowing you to add a nut or other solution, depending on the screws you have available.

Tags