1 / 3
XL Buddy Board Cover 60mm Fan — zdjęcie 1
1 / 3

XL Buddy Board Cover 60mm Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the Surfalex2000 cover, but for a 60mm fan

Ocena
5 / 5
Polubienia
18
Pobrania
113
Wydruki
2
Wyświetlenia
567
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

The opening is designed for a 60mm fan, with a center-to-center distance of 50mm between the mounting holes. 

One advantage of using a 60mm fan is that the screws protrude into the empty space above and below the circuit board, reducing the risk of accidentally shorting any components.

I used a 24V Filter Fan ("Fan SL1/S, CW1/S" sold by Prusa", and connected it to the 24V terminal on the board. 

I also installed an On/Off switch, which is accessible from the front of the printer as I only need the fan during parts of the summer. https://www.printables.com/model/988553-on-off-rocker-switch-housing 

Suitable screw size is 25x3 mm (4 screws), given a fan thickness of 15 mm.

There are two options for the board cover:

Option A: Similar to the original design, where you screw a 3mm screw directly into the plastic, hence there is an added boss to the cover to add material to screw in.
Option B: Features a flat surface, allowing you to add a nut or other solution, depending on the screws you have available.

Tagi