1 / 5
Cap for Hydration Reservoir
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap designed for Pinguin Camelbag. However, it could work with other brands, too.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 19
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing
- layer height: 0.2 mm
- supports: none
- material: PLA or PETG
Assembly
- Print both parts.
- Use about 10 cm of 5 mm cord (or elastic cord).
- Put both printed parts on the cord.
- Lightly melt both ends of the cord with a flame and crimp them against a flat, preferably metal object.
- Remove the mouthpiece from your hydration system and attach the cap to the hose. Then, put the mouthpiece back.
Notes
- Cleaning – Don't forget to clean it properly before first and after each use.
- Designed for Pinguin Camelbag. However, it also works with Forclaz and could be compatible with other brands. See the dimensions (in mm) below to find out if it will fit.
