Counting matching models…
Dryer for Source Deuter hydration bladder 3l Version 1 as shown in the photos without step at the dryer's foot. Verision 2 with step at the dryer's foot for stabilized standing and better ventilation. Print Settings Rafts: No Supports:…
The Verathon Bladderscan BVI 3000 is using 6 cells NiMh 7.2V battery. It is expensive, hard to find, expensive to renew and moreover uses a proprietary charger which is brittle and often missing, super expensive on the second hand market.…
I found that after using my water bladder in my hydration pack that it remained wet inside for an extended period of time. I tried a few of the inserts that hold the bladder open but it still remained wet after many days. This print uses…
Helps to dry your bottle and water bladder faster. My water bladder is dry after 2 hours and the bottle is dry after a little more than 1 hour. You only need a 40mm noctua fan, no tools and no screws.
Hook designed to hang an empty water bladder from a closet hanging rod. Includes a void for a 8 by 3 mm circular embedded magnet to hold the magnetic drinking tube. Designed originally for an Osprey Hydraulics Reservoir, but generic…
Parametric hydration pack Bladder Hanger Change the size of the hook to accommodate your hanging needs. Make sure to add a few mm extra so the fitment isn't so tight (unless you prefer it that way then go right ahead) Default hook size is…
I make and sell fountain pens and have recently released a model which features a novel filling system using a twist bladder printed from flexible TPE. The bladder has survived over a hundred thousand actuations and so it is unlikely to…
Cover the mouth piece of your water bladder against dirt. The design is printed in TPU which allows to slide the cover on and off without removing the tube. The cover is held in place by a friction fit.
A remix from a model by theRatchet. It's a part that allows the water bladder to dry properly. I've slightly changed the shape to fit better the bladders from Camelbak. It's possible to add some characther in the middle of the part if you…
I designed this with a USWE 2 liter water bladder. Fit is just a little tight because I hang the bladder upside down to dry. Scale the device to your own bladder. One is a little longer for the bigger bladders. I made that one slightly…
Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…
The Verathon Bladderscan BVI 3000 is using 6 cells NiMh 7.2V battery. It is expensive, hard to find, expensive to renew and moreover uses a proprietary charger which is brittle and often missing, super expensive on the second hand market.…
Remixed this to make it a little wider. The hydration water tube I have is insulated, so it's a little wider.
I found that after using my water bladder in my hydration pack that it remained wet inside for an extended period of time. I tried a few of the inserts that hold the bladder open but it still remained wet after many days. This print uses…
Man kann mit dem Trockner auch Flaschen mit großen Öffnungen trocknen.
Helps to dry your bottle and water bladder faster. My water bladder is dry after 2 hours and the bottle is dry after a little more than 1 hour. You only need a 40mm noctua fan, no tools and no screws.
A simple collapsible rack to help hydration bladders dry. The legs nest on the stand for storage. 10/5/25 Update: I added files for a completely unnecessary USB 5v 50mm blower I bought on amazon. This reduces dry time to about 30min…
If you have a bladder upgrade kit on your shock you may need this. These bladder upgrade kits can be hard to get off the shock body. Print this with 12 perimeters and 100% infill. I'd try CF-PC or some other technical material. I used PLA…
Drying hooks for the Cnoc VectoX water bladder – designed to keep the opening wide for optimal air circulation and drying. Fast print with no supports needed. Fits up to 8mm carabiners. Recommended to print in PETG with 15% infill for…
Thanks to ChriL for the idea. I used his hook shape and modified the interface to work with my Dunkive water bladder (a Chinese knockoff of the CNOC). Print in PLA at 20% cubic infill, 2 walls, 4 top/bottom. I thought it would break when…
Tool for outer portion SCUBA BCD Bladder Flange. Works in concert with https://www.thingiverse.com/thing:2534711 created by Homer310. Print Settings Printer: GEEETECH MeCreator2 Rafts: No Supports: No Resolution: .2 Infill: 50% How I…
Scuba BCD Bladder Flange modeled off of DGX Flanges. In the pictures the red is ABS printed from my design, the black one is a DGX commercial product. I made mine parts interchangeable with the industry standard. the last picture is…
Drying stand for various water bladders. It was a CAD exercise for experimenting with snap fits. Print settings 0.4 nozzle 0.2 layer height 4 wall loops no support (see image for part orientation) tested with ABS, but other filament types…
A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…
See details in Radek's original design. It's basically an air duct to direct air from a 120mm CPU fan into the hydration bladder to speed up drying. Can also work without the fan, to keep the bladder open and facilitate draining / drying.…
ENGLISH Water Bladder Drying Stand, 335mm high, base 90mm*90mm FRANÇAIS Égouttoir pour poche d'hydratation, hauteur 335mm, base 90mm*90mm
Simple replacement piece for my water bladder that had a missing top bracket. About 16.5cm long.
Summary This clip / holder / closure for hydration bladders is simple, sturdy, and fully watertight. It’s a nice project that shows how well printed parts can match the function of commercial closures. Ideal for upgrade or replacement of…
Use-case Some Utricularia species like an airy pot for which you can use the orchid 'vanda' pots, but making one yourself is more fun. Utricularia can be quite adventurous in conquering neighbouring pots so I had a few pre-requisites:…
Hook designed to hang an empty water bladder from a closet hanging rod. Includes a void for a 8 by 3 mm circular embedded magnet to hold the magnetic drinking tube. Designed originally for an Osprey Hydraulics Reservoir, but generic…
Parametric hydration pack Bladder Hanger Change the size of the hook to accommodate your hanging needs. Make sure to add a few mm extra so the fitment isn't so tight (unless you prefer it that way then go right ahead) Default hook size is…
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Remix of WhatsUp3d / @jpp123's original CamelBak Hydration Bladder Drying Rack. This is a refined remix created in Tinkercad. I narrowed the main structure to perfectly fit my Lunchbox Hydration Pack (Cloud Mesh) with a 2.0 L bladder that…
This is an improved version of my old drying rack design for hydration bladders (Trinkblase). This new version now has foldable arms that make inserting the drying rack into your hydration bladder and getting it back out much easier! With…
This is a modular design to support drying and storage of the Decathlon hydration bladders. Both the 1L and 2L. The top frame can mount either bottom frames to suit the 1L or 2L. The hook is common between both. I printed in Esun PLA+ on…
A dryer for the Salomon flask and bladder (designed for the 1.5L bladder, but also work for the 2L version). It also work for other brands of bladders and flask, but was designed for the Solomon's ones. There is room for 5 flasks an 3…
The cage is printed in halves, so 2 pieces are connected using the dovetail pins. The rod can be customized according to the length of the bladder. The C clip slots into the rod with a tight fit.
The BladderScan BVI 9400 is a portable 3D ultrasound scanner designed to non-invasively measure bladder volume. It is widely used in hospitals, emergency departments, urology clinics, rehabilitation centers, and long-term care facilities…
Customized version of https://www.thingiverse.com/thing:2912390 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2912390 Instructions Using the following options: $fs = 0.1 thickness = 2 strap_width = 65…
Create a better Hydration bladder holder for my bag pack. Screws are 2x M4 12mm with Nuts in Place on the other side. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,16 Infill: 30 Filament: Material 4…
I used this fan from Amazon: B07V2KVQB7 https://www.amazon.com/WINSINN-50x15mm-Turbine-Brushless-Extruder/dp/B07V2KVQB7
I printed it with the left side facing the bed so it don't need any support material. Attach it with 2 Rislan strap.
Suitable for Deuter Strammer water bladders. https://www.deuter.com/de-de/shop/zubehor/c27998-trinkblasen 4 x 8x2 mm magnets are needed When slicing, add a print pause each time to insert the magnets. Pay attention to the correct polarity.
This mount is the perfect way to hang your hydration bladder to dry. I was tired of hanging mine on open cupboard doors so I realized I could use my Skadis pegboards. The base plate uses my universal peg format and a modified peg with a…
The Apidura Frame Pack Hydration Bladder currently comes with no attachment system. Existing clips by other brands are too small and provide no solution to attach to a bike. This clip is part of a custom mount system using a magnetic snap…
I was frustrated by how long it takes to dry a water bladder after using it. What bothered me even more was how moisture tends to stay inside the tube. So I gave it a shot and designed a dryer to speed up the process and push the moisture…
Clip to keep open a water bladder and attach it to a cord for drying. Without clip there is no easy way to hook a bladder to a clothes line with it open and facing up, causing it to take 1+ weeks to dry. Fast print with no supports…
I needed a simple way to hang my water bladders out to dry. So far this fits two different CamelBak and one Osprey. Printed in Hatchbox Yellow PLA at .2mm and 50% infill
PLEASE NOTE: This is an old design - check out the new version here ! Hydration bladders for hiking and biking are a very handy thing; the trouble is just getting them to dry after use, ideally fast. For that, I created this dryer that…
It's a simple fan based dryer for platyus bigzip water bladder. Bill of materials: Part PCS Printed structure ( the attached 3d model ) 1 40mm fan (12 Volts) 1 M3 x 10 machine screw 4 Quick connector 1 Power supply ( 9v, 12v power adapter…
A little jig to help dry out the bladder. Length wise, its' a bit short, but this fits my 300 Voron. you can extra insert the closing slide to keep the bag open. The width might be a snug fit, but you can press down on it and it will flex…
Do you have a water-bladder style hiking backpack? Did you buy the camelback drying hanger only to find out it doesn't fit your bladder? This adapter is for you. It simply slides onto the existing hanger and narrows it down to 5mm to fit…
Add a 5v blower, a power source, and a few screws to this gadget, and you'll have a way to quickly dry out the bladder from a hydration pack (like a CamelBak) for storage. If you've ever left water in one, even a little bit, for more than…
Very simple to print with no supports using either PLA or PETG.
The ellipse widens the bladder and causes it to be better ventilated and thus dry faster. The formation of bad odors is reduced and can thus extend the life of the bladder. The ellipse was designed for the use with a 2 liter water bladder…
This frame is for this product: https://www.msrgear.com/water-treatment/storage-bags/dromedary-bags/dromedary-bags.html I designed these to make the water bladder a bit easier to handle. The f3d file is included for customization. The…
Bought from Harbor Freight Tools. Tried keeping them in the original packaging which was troublesome. Made this to keep them together and prevent any possible bug from getting inside and potentially clog the outlet hole the next time I…
Needed a drying rack for running bladder, bottles, hose, and all the little parts. This is version two, down the road i'd like to make it so more parts come apart for storage while not in use, but for now, this works. Have tested a…
Clip to fit the Gregory day pack, allowing me to attach my Osprey water bladder.
Spacer that I use to allow air circulation inside of my water bladder to allow it to dry out.
Use strong double sided adhesive tape to mount the clip at the bottom side of your kitchen cabinet (I used "Pattex kleben statt bohren"). In the Clip you have five slots. To of them are made to slip the Deuter/Source Bladders in. The are…
Tired of the Hassle? Simplify Your Hydration Bladder with 3D-Printed Parts Are you frustrated with the inconvenience of using your hydration bladder? Discover these innovative 3D-printed parts designed to enhance your experience and make…
A holder to keep your water bladder secure inside your backpack, in case that your backpack doesn't have one built in. Printed with tpu.
Rack created to hold 2 soft bladders for drying. Added a second file for addtional towers for drying of soft flasks. I epoxied these to the base of the original model.
A simple MOLLE attachment to clip an hydration bladder tube onto your backpack shoulder strap. Parametric design included so you can tweak it to your requirements if needed. The default supported tube diameter is ~10mm.
I make and sell fountain pens and have recently released a model which features a novel filling system using a twist bladder printed from flexible TPE. The bladder has survived over a hundred thousand actuations and so it is unlikely to…
Dimensions 220 mm × 100 mm × 30 mm. Thickness 2 mm. Or dimensions 110 mm × 100 mm × 30 mm. Thickness 2 mm. Or dimensions 220 mm × 120 mm × 30 mm. Thickness 2 mm.
Designed to fit with a Rev'it Tracksuit to secure the line and paired with a magnetized clip.
requires 2 4x15mm magnets and a print pause when the magnets are inserted. Be sure to make sure they are inserted in the correct orientations.
Printer settings: 0.4mm nozzle 0.3mm layer height 15% gyroid infill PLA+
Goes around the metal tube at the front of the desk has a tendency to press into my private region and it is really cold and unpleasant. I have printed out three of these at 230mm each, for a total length of 690mm. You may need to adjust…
