Mrk4 PolyLight LW-PLA Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PolyLight 1.0 Active Foaming MRK4 print profile (for Flightory RC Airplanes)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 70
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This profile is comparable with PolylLight 1.0 LW-PLA (Active Foaming) on the Prusa Mrk4 tested with Slicer 2.8.0.
Top contact Z distance set to 0.4mm gives so far better results with support printing
Filament is dried before usage on recommended manufacturer settings.
Bed adhesion can be a problem using this filament on the Satin sheet, however a few sprays of hairspray or purple glue stick will fix this issue.
While printing the filament is stringy, this is normal and can be removed by sanding it away.
~photos are for illustration purpose only~
Setting sources:
https://flightory.com/lw-pla-print-settings/
https://3dlabprint.com/shop/polylight-1-0-green-lw-pla/
https://3dlabprint.com/faq/prusaslicer/