Double Pulley
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created my own Double Pulley, a light-duty pulley can achieve a 1:4 mechanical advantage when two are used together.
- Rating
- 0 / 5
- Likes
- 72
- Downloads
- 170
- Makes
- 0
- Views
- 1,196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created my own Double Pulley, to everyone, who needs a light duty pulley for various reasons. I will use it to working with paracord and for capmping purposes.
DONT USE FOR CLIMBING!
If print two of these pulleys and puts to work together and achieve an impressive 1:4 mechanical advantage.
Light duty - 10 kg successfully tested (i have only two 5KG weghts) with 25% infill
Dimensions - 81,26mm x 66,12mm x 24,12mm
Required hardware only 2x threaded screw with countersunk head M4x30
Printing:
For my purposes of working with paracords i used 25% infill, but to maximize strength increase the number of perimeters or use a 100% infill.
Also if You need some different sizes, You can take my model and resize them as you need :-)
Printing moving parts in one piece. Remove the supports thoroughly!
Print settings
Printer Brand:
Prusa
Printers:
i3 MK3S+
Rafts:
No
Supports:
Yes
Distinction:
0.20
Filling:
25 % +
Thread Brand:
Prusa
Thread color:
You can use Your favorite colour
Fiber material:
PETG