Enclosure for 3018 CNC Controller
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.96 – €1.17 net (excluding VAT)
For file: BoxControllerUnten_0.4n_0.2mm_PETG_MINIIS_51m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.06 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 51 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Enclosure for controller board. / Gehäuse für CNC Controller Platine.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 79
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My CNC came without an enclosure for the controller. This is my attempt to fix that.
Printed in PETG with 0.4mm nozzle, mostly the “structural” profile.
For the top (Oben) of the box there should be some painted supports inside the holes for the screws.
Original screws with 10 mm length could be used to screw the box to the frame.