1 / 4
Elegoo Saturn 4 Ultra rear vent plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a light-proof vent to rear of an Elegoo Saturn 4 Ultra resin printer for use in a vented enclosure
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 109
- Makes
- 0
- Views
- 1,922
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This drop-in accessory for the Elegoo Saturn 4 Ultra resin printer adds a light-proof air vent to the rear accessory plate. It's designed for use in a vented enclosure and allows resin fumes to be vented without exposing the print to unwanted external light.
Print Settings
The assembly in the pictures was printed at the following settings:
- Printer: Prusa Mini+
- Print Settings
- 0.4mm nozzle
- 0.20mm layer height
- 15% infill
- Filament: Prusament Jet Black PLA
- Supports: 1 spot may require supports; depends how well your printer does bridges.
- Brim: none
Print Instructions
- Orient the print with the large plate (with the 4 screw holes) sitting flat on the print bed.
- You may need to add supports to the very edge of the air inlet depending on how well your printer does bridges.
- Otherwise the model is designed to print without supports.
Assembly Instructions
- To assemble this vent cap, you will need at minimum:
- 4x M3-8 (or longer) socket cap hex screws
- 4x M3 hex nuts
- Remove the existing backplate from your Saturn 4 Ultra.
- Replace it with this new vent plate and attach it with the 4 screws and nuts.
- Place your entire printer in a vented enclosure.
- Enjoy your fume-free prints!