1 / 3
Unterteilungen divider partition MARS Svratka Kleinteilmagazin shelf cabinet 136x275 mm drawer Lade — image 1
1 / 3

Unterteilungen divider partition MARS Svratka Kleinteilmagazin shelf cabinet 136x275 mm drawer Lade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Unterteilungen divider partition MARS Svratka Kleinteilmagazin shelf cabinet 136x275 mm drawer Lade

Rating
0 / 5
Likes
3
Downloads
28
Makes
0
Views
143
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Unterteilungen für die mittelgroßen Laden der MARS Svratka Kleinteilmagazine mit 136 x 275 mm. Die Unterteiler sind leicht konisch. Mit dem Radius nach oben auf die Druckplatte stellen. Gedruckt mit PLA, 0,2mm Schichthöhe und 3 – 4 mm Rand/Brim.

Nachtrag: Ich habe soeben neue Kleinteilregale bekommen und festgestellt, die Nuten in den Schubladen haben nun unten nur mehr 1,5 mm anstatt wie bei den Vorhandenen 1,6 mm => die Trennwände passen nicht ganz hinein. Am einfachsten unten an dem Wänden, nicht über die ganze Länge, nur unten, die Kanten leicht abfeilen, dann passt es wieder.
……………………….
Dividers for the medium-sized drawers of the MARS Svratka small parts magazine with 136 x 275 mm. The dividers are slightly conical. Place them on the pressure plate with the radius facing upwards. Printed with PLA, 0.2 mm layer height and 3 - 4 mm brim.

Addendum: I have just got new small parts shelves and noticed that the grooves in the drawers are now only 1.5 mm at the bottom instead of 1.6 mm like the existing ones => the dividers don't fit completely in. The easiest way is to file the edges slightly at the bottom of the walls, not along the whole length, just at the bottom, then it will fit again.

Tags