Snapback Hook/Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very simple (and probably overkill) little mount to easily hang Snapbacks on your wall.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
To properly hang Snapbacks from this, the snap-back has to be slid into the hanger on either thin side and then adjusted to the center so the overlapping parts prevent slipping out (see picture 2 (also excuse my disgusting walls))
The opening is meant for just regular cheap drywall screws (PH2 3.9mm x 25mm) since I have severe trust issues with double sided tape but if that is not something you struggle with, I would imagine that works just as well.
I printed mine in PLA with fairly standard settings and I don't think material choice or settings matter a whole lot for this.