Zero G Mercury Revo Hemera XS Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will allow you to mount a Hemera XS extruder onto a Ender 5 Plus that has the Zero G mercury upgrade
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Note this is a work in progress. While it does work, it does have room for improvement.
This will allow you to mount a Revo Hemera XS Extruder onto a Ender 5 Plus that has the Zero G mercury upgrade.
I printed my parts using ASA as I did with all my other mercury parts.
This will print with 5 parts
Hemera Mounting piece
Bl touch mount Modified
Trihorn Duct modified which is now in 2 pieces.
X Sensor Mount Modified
You will have to physically change a few things on the printer to make room for the Hemera Extruder as it sticks out more to the front.
Move the Lineral Rails for the Y axis all the way to the back, you will have to move the Y Axis end stop back further as well.
These are the M851 settings that worked for me however I would recommend changing the Z offset until you get it tuned it as it could be too closer for your setup.
M851 X-37.00 Y35.00 Z-3.58
If you are using their hot pack with the 104NT sensor you will have to change your senor type to #5 in the firmware. (If using Marlin)