Moonalander Tent Kit (angle customizable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very stable Moonlander Tent kit. Files here for an angle of 30º. Customizable on OnShape.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a very stable Moonlander tenting kit. Superglue is necessary for this model; I've had a good experience with 3D printing-specific superglue.
This uses the screw that holds the default leg to secure the keyboard to the board. You can additionally use a 3Mx12mm screw on the outer side to keep it more secure and have less stress on the single screw+hole, but that is not strictly necessary :)
The uploaded files are for a 30º keyboard angle and the right-hand side (Simply mirror the base and board to get the other one).
I suggest gluing anti-slip feet to the bottom if you do not have a mouse mat that stops that already.
You can customize the angle in the OnShape document of this project https://cad.onshape.com/documents/09c15e1c8bdf112ca857fd8f/w/c01323884fe13c04ed316982/e/12356da3ac3deb4828c7011a?renderMode=0&uiState=66d444b13ad39a0f302b3a38
Make a copy and then adjust the angle in the variable studio, go back to the assembly, and right-click that tab to choose export!