Moonalander Tent Kit (angle customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very stable Moonlander Tent kit. Files here for an angle of 30º. Customizable on OnShape.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a very stable Moonlander tenting kit. Superglue is necessary for this model; I've had a good experience with 3D printing-specific superglue.
This uses the screw that holds the default leg to secure the keyboard to the board. You can additionally use a 3Mx12mm screw on the outer side to keep it more secure and have less stress on the single screw+hole, but that is not strictly necessary :)
The uploaded files are for a 30º keyboard angle and the right-hand side (Simply mirror the base and board to get the other one).
I suggest gluing anti-slip feet to the bottom if you do not have a mouse mat that stops that already.
You can customize the angle in the OnShape document of this project https://cad.onshape.com/documents/09c15e1c8bdf112ca857fd8f/w/c01323884fe13c04ed316982/e/12356da3ac3deb4828c7011a?renderMode=0&uiState=66d444b13ad39a0f302b3a38
Make a copy and then adjust the angle in the variable studio, go back to the assembly, and right-click that tab to choose export!