1 / 5
Surround Speaker Stand (Samsung PS-DS1)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Surround Speaker Stand with two 3D printed parts and a 1' aluminium tube. The design has holes to route the wires.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Public Domain
This design is made to accommodate a Samsung PS-DS1 speaker, but any other speaker should work as long as its smaller than 88mm x 72mm (width x depth).
You will need a 1 inch (External diameter) tube (in my case Aluminium).
It's designed to fit reeeeeally tight, so be shure your 3d printer is accurate.
Print with flat side on the bed, no supports.
Print Settings:
- 0.2mm layer height
- 4 walls
- 15-20% infill
- no brims or supports