1 / 1
Canon 10x42 L IS WP Replacement Top Rubber Piece — image 1

Canon 10x42 L IS WP Replacement Top Rubber Piece

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement for rubber grip piece that can get deformed over time and come off.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Another replacement part for the Canon 10x42 L IS WP.  Over years of use the rubber piece can be stretched out and no longer fit, so I designed this part to be printed in TPU as a replacement.

I printed in TPU with a .4mm nozzle/0.2mm layer height, but you can probably go smaller if you want a smoother gradient on the top.  I used regular supports for the underside.  

It requires a few post processing steps after removing support material.  First, cut the back vertical piece along the notch so it will fit properly between body and eyepiece.  Next, use a heat gun to melt the circular piece to the right of the IS button so it folds down into the curved shape on the binocular.  Finally, heat the end piece so it folds down along the front of the binocular.  Cover the backside in double sided tape, and adhere to the binocular. 

Tags