Canon 10x42 L IS WP Replacement Top Rubber Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for rubber grip piece that can get deformed over time and come off.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Another replacement part for the Canon 10x42 L IS WP. Over years of use the rubber piece can be stretched out and no longer fit, so I designed this part to be printed in TPU as a replacement.
I printed in TPU with a .4mm nozzle/0.2mm layer height, but you can probably go smaller if you want a smoother gradient on the top. I used regular supports for the underside.
It requires a few post processing steps after removing support material. First, cut the back vertical piece along the notch so it will fit properly between body and eyepiece. Next, use a heat gun to melt the circular piece to the right of the IS button so it folds down into the curved shape on the binocular. Finally, heat the end piece so it folds down along the front of the binocular. Cover the backside in double sided tape, and adhere to the binocular.
