1 / 1
Remix of the motherboard cover by Henlor for 120mm fan — image 1

Remix of the motherboard cover by Henlor for 120mm fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I decided that a 60mm fan was still too noisy, so I adapted both the motherboard base and cover to fit a 120mm fan

Rating
0 / 5
Likes
7
Downloads
34
Makes
0
Views
313
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I basically modified the motherboard base and cover to be fixed using m3 nuts and screws instead of magnets and created a mounting plate on top to fit a 120mm fan for those that run the printer without the metal plate underneath. Mind you should still put a filter on the fan so it doesn't suck up dirt onto the motherboard.

I'm using a Nocuta NF-A12x25 Chromax and a noctua NA-VC1 24-12V stepdown adapter

just print both and where the magnets would go, you use an M3 screw (I used a M3x16, but that's what I had at hand at the time. 

PS: The picture is of the first iteration, but I was not happy with the quality. The uploaded file is the correct one.