1 / 3
Orange Pi PC Screwless Snap-fit Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Orange Pi PC that does not require screws. Just push the top and bottom pieces together to fix them together.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 199
- Makes
- 5
- Views
- 506
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The Orange Pi PC isn't so popular, so there are a few options for snap-fit or screwless cases. With this, I made one myself. A 4010 fan can be installed inside the case through snap-fit as well.
Printing Suggestions:
- Print the bottom part in the same orientation as when you import it in the slicer.
- Print the top part on the flat side by rotating it 180 degrees on the X- or Y-axis.
- Can be printed without supports. The only part that might need one is the fan snap-fit part for the 4010 fan.