Brita Ultramax Riser

This is a simple riser for the Brita XL Ultramax (27-cup) filtered water dispenser. My original design was to add a slight lift for the dispenser to clear the lip of the shelf in the fridge. The riser fits under the filter and slots in to the lip of the base.

There are other Brita Ultramax lift designs, but this one works well as a minimalist solution if your print bed isn't large enough to print those.

Print at least 2 for an even lift, but more can be printed if needed.

The default lift is 5mm, but you can simply scale the Z-axis of the model up to around 300% in your slicing software for a higher lift.

I achieved good results on my Ender-3 Pro with 0.2mm layer height and 20% infill.

Here's the exact model of my Brita: Brita Extra Large Ultramax 27 Cup Black Filtered Water Dispenser

Here's the Brita Dispenser shroud pictured designed by ckitching: https://www.thingiverse.com/thing:2854558

Hope this works well for your needs!