1 / 7
Twisty; A 3D Printed mechanical pencil
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have the lead but not the pencil? Short on pencils? Want a special pencil? Well this model is for you.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 94
- Makes
- 0
- Views
- 929
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Uses 0.7mm lead
- Just twist the screw to advance the lead
- The screw prints in 2 parts, and you should glue them together. You can also try to melt/solder the pieces together.
- Print the screw with 100% infill for best strength
- If the hole for the lead in the body is too small, you can use a small pin or a needle to make it bigger.
- It is recommended to print it slowly since there are fine parts and no supports are needed
- Please let me know if anything doesn't fit
- Designed by me in Tinkercad
- FYI: I soldered/melted the 2 pieces together in the photo, but it isn't required, you can just use glue, or it may friction fit.