1 / 1
Filament and Waste Pelletiser — image 1

Filament and Waste Pelletiser

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I have designed a cutter that creates old filament rolls into meltable pellets and another that does the same from waste

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
254
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

EDIT: The waste hopper is still a work ion progress it does not perform well at the current moment. 

This design is a simple 3 part design. 

1: Two different cutters. One that cuts filaments into pellets and another that cuts waste material into pellets. Both have a screw thread on the bottom that allows for a bottle to catch the pellets. 

2: The bottle that catches all the waste material. 

3: A ½ inch trimmer router bit used to cut the material. The router bit is then connected to a hand drill. 

The design has worked for me well so far and I am looking to improve the design in the future. 

I have printed this on a Bambu Lab P1P on 0.2mm strength setting. 

Tags