Filament and Waste Pelletiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed a cutter that creates old filament rolls into meltable pellets and another that does the same from waste
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
EDIT: The waste hopper is still a work ion progress it does not perform well at the current moment.
This design is a simple 3 part design.
1: Two different cutters. One that cuts filaments into pellets and another that cuts waste material into pellets. Both have a screw thread on the bottom that allows for a bottle to catch the pellets.
2: The bottle that catches all the waste material.
3: A ½ inch trimmer router bit used to cut the material. The router bit is then connected to a hand drill.
The design has worked for me well so far and I am looking to improve the design in the future.
I have printed this on a Bambu Lab P1P on 0.2mm strength setting.