Liczymy pasujące modele…
If you are like me you have difficulties remembering what sort of pellets you have in your hopper. I made this so I can tag the hopper with the right wood. In the design I made room for a 3x8mm neodymium magnet so I glued in place. I also…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
If you are like me you have difficulties remembering what sort of pellets you have in your hopper. I made this so I can tag the hopper with the right wood. In the design I made room for a 3x8mm neodymium magnet so I glued in place. I also…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
If you are like me you have difficulties remembering what sort of pellets you have in your hopper. I made this so I can tag the hopper with the right wood. In the design I made room for a 3x8mm neodymium magnet so I glued in place. I also…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
If you are like me you have difficulties remembering what sort of pellets you have in your hopper. I made this so I can tag the hopper with the right wood. In the design I made room for a 3x8mm neodymium magnet so I glued in place. I also…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
About: Magnetic HEPA filter for the X1C which attaches to the exhaust fan in the back. This almost el i minates the PLA/PETG smell as well as making the fan significantly more quiet. This model has an index point for the proper alignment…
As filtration system for core one is still not ready, and even pla smell is not great in an apartment, I created “backpack” attachment for core one. It utilises (quite plenty of) nevermore style carbon pellets and existing chamber fans to…
A tray for selected pellets 5.5 for use in a empty can of JSB Exact Jumbo 500 unid. of 9,5 cm. diameter. 120 pellets (2 trays, 240 pellets selected in a can). Printed in PLA with a 40% infill density. The tray must be printed with the…
Introduction This model is meant as a replacement or upgrade of the Q2's exhaust/air filtration system. It allows for the use of cheap replaceable HEPA filters and activated carbon pellets, and fits 100mm exhaust tubes, and a 100mm inline…
Pelle doseuse spécialement pensée pour la pêche à la carpe 🐟 Idéale pour doser proprement pellets, graines, amorces et stick mix, sans en mettre partout (oui, même dans le sac…). Imprimée en 3D, robuste, légère et pratique, elle trouve…
A refillable box to change the original filter of the Geberit Aquaclean with carbon pellets. (I have the Tuma Comfort, but I think it works for other Geberit Aquaclean as well) Settings: 0 Top and 0 Bottom layers, 5 Perimeters, 40%…
Handling 3D printing pellets can be messy. I designed this dual-purpose tool to make handling 3D printing pellets much easier and mess-free in my workshop. It works as a precise scoop to grab your plastic material, but the coolest part is…
Pellet holder for .177 caliber/4.5mm pellets. Designed for ISSF air pistol/air rifle competitions. Holds wadcutter (flat head) pellets. 60 spaces for pellets (6 x 10 rows), which matches the number of pellets fired during competition. It…
Pellets from Pikmin (2001), file currently contains the 1 and 5 pellet designed for multi-material printing as well as the Pellet Posy leaves and stem as a separate model. Models can be easily scaled but the version in the file by default…
3 airgun .177 cal pellets -wadcutter -hollow point -pointed I print these in sets of 30-50 should take about a minute per using a 0.6mm nozzle Works quite well in my old crosman backpacker 1389
A cost-effective replacement filter holder for Modkat litter boxes. Designed to accommodate carbon pellets, it offers a budget-friendly solution to maintain freshness and eliminate odors efficiently. The cost savings: Modkat This Model…
Note: This is still a work in progress with a few bugs I want to work out, but it is functional. This is a screw on cap for the aquarium co-op Easy Community Floating Pellets. You assemble the top, screw it onto the fish food container,…
This 3D model is a perforated canister with a screw-top lid, designed to house activated carbon pellets. The perforations on the canister allow for airflow, enhancing the activated carbon's ability to absorb and neutralize unwanted odors…
My filter is mounted on top of printer. Therefore pellets need to be hold in place.
Das Rohr hat einen Innendurchmesser von 55 x 55 mm. Der Trichter wurde unten mit 52 x 52 mm gedruckt (Aussenmaß), damit passt er auf jeden Fall. Die obere Einfüllung hat einen Durchmesser von 150 mm. Gedruckt in PLA. The tube has an inner…
This poop scoop is ideal for very large pellets as it has 8.5mm spacing. Best printed out of basic PLA (matte has worse layer adhesion and is weaker overall which might be an issue if you're pushing a large volume of pellets).
The thing is pretty basic and my printer says it should take 5 to 6 minutes. Also this is untested, it could explode or damage property. TRY AT YOUR OWN RISK. I will try it in my airguns, and update it with a partially tested or unsafe…
Tested with JSB Exact .177 box. Files are print-oriented.
This replaces the stock carbon filter on the K1 max with a large filter full of carbon pellets Print the lid and screen with 0 tops, 0 bottoms, 6 walls and 20% gyroid infill. This makes them into meshes that allow air through. (See pics)…
The diabolo airgun pellets are scaled to 1 inch and can be scaled down to the desired size as needed. For use in PCP airguns only, never use lightweight pellets in in spring powered airguns.
A tray for selected pellets 5.5 for use in a empty can of JSB Exact Jumbo 500 unid. of 9,5 cm. diameter. 120 pellets (2 trays, 240 pellets selected in a can). Printed in PLA with a 40% infill density. The tray must be printed with the…
I sand and polish some of my 3D (resin) prints in a Rock tumbler and I needed some filler pellets for the last three stages and where to lazy to order some. So I modeld some quick that I could print in the same material so it won't…
Introduction This model is meant as a replacement or upgrade of the Q2's exhaust/air filtration system. It allows for the use of cheap replaceable HEPA filters and activated carbon pellets, and fits 100mm exhaust tubes, and a 100mm inline…
Pelle doseuse spécialement pensée pour la pêche à la carpe 🐟 Idéale pour doser proprement pellets, graines, amorces et stick mix, sans en mettre partout (oui, même dans le sac…). Imprimée en 3D, robuste, légère et pratique, elle trouve…
A refillable box to change the original filter of the Geberit Aquaclean with carbon pellets. (I have the Tuma Comfort, but I think it works for other Geberit Aquaclean as well) Settings: 0 Top and 0 Bottom layers, 5 Perimeters, 40%…
This 3D-designed cat litter scoop is optimized for efficient cleaning and minimal waste. It comes in three carefully engineered variants, each featuring different hole sizes and lengths to suit various litter types and user preferences.…
Handling 3D printing pellets can be messy. I designed this dual-purpose tool to make handling 3D printing pellets much easier and mess-free in my workshop. It works as a precise scoop to grab your plastic material, but the coolest part is…
A compact seed starter specifically for use with 40mm. seed pellets. The system consists of an eight-slot planter and a matching reservoir tray, making it a efficient solution for starting your garden indoors or in a small greenhouse. The…
Klemme um ein versehentliches Öffnen der Diabolo-Box zu verhindern. Für Standard-Dosen.
ENGLISH (French below) Features The idea is to keep the bags pressed against the wall and neatly stacked. The assembly consists of 2 3D-printed parts, a strap, and a few standard hardware items. One printed part simply attaches the system…
Print: Printer: Anycubic Mega X Resolution: 0.1 mm Support: yes Material: PLA, Infill: 100% ____________________________________________________________________________________________________________ Druck: Drucker: Anycubic Mega X…
This .scad will generate a ball bearing retention ring of any size you want with any number of balls! I created it to work with Airsoft pellets (BBs) but it will work with any ball or sphere shaped object. The idea is to use this in a…
Have total six different boxes in the file system. Different makes, different sizes of boxes 21/23/24mm, with or without “Match” text. You'll certainly find yours! I have two sets in place, one for my match pellets, another for other…
I adjusted the VEFACH (Voron Exhaust Filter Activated Coal + Hepa) vent holes for use with my Nevermore brand carbon pellets. When I measured the pellets they were a little over 4mm in diameter and the length was always greater than that.…
Peat moss pellets are great for starting seedlings, so I made a small tray that is printable in vase mode with 0.6 or 0.8 nozzle. Just set the external perimeter to 0.9mm. As I was printing the first versions I did not account for…
I printed two perimeters from TPU 0.4mm nozzle, 0.2mm layer. I was tired of using electrician's tape. It fits perfectly on JSB boxes, I don't use others so I can't test them.
Box for airgun pellets in the shape of JSB Match Diabolo. The box can hold approximately 200 pcs of airgun pellets.
This design is a Fusion 360 file. The project allows for printing cheap ball bearings using only 6 mm ASG pellets. I managed to create reliable design easy to modify. How to use “user parameters”: In Fusion 360 go into “MODIFY > Change…
Model Summary: Improved Design : I've created an additional version of a charcoal filter. Active Charcoal Pellets : Unlike the original model designed for carbon filter pads, mine is tailored for coal-activated carbon pellets. Screwable…
Box for airgun pellets - Straton Box for airgun pellets in the shape of JSB Straton. The box can hold approximately 200 pcs of airgun pellets.
This peat pellet holder is easy to print, and utilizes a slab modifier to create a honeycombed pattern throughout the unit. Printed using PLA “biodegradable" filament (https://www.amazon.com/dp/B0853468ZF) with 10% honeycomb fill density…
In a previous design for an air filtration system I had to cut away into the plexiglass in the lack enclosure and added a screen material for the charcoal pellets. In this design I used the Infill percentage removing top and bottom layers…
I designed this filter so that I can use charcoal pellets on my K1. The ventilation grid is optional and can be disabled (set parameter vww to 0 ), so that you can use filter cartridges of any size and brand. I'd suggest to print this…
Introduction Keeping filaments dry can become somewhat of a chore, specially when you want to swap to different filaments depending on the model (perhaps replacing color or material). I designed this small container that fits in the…
This is a somewhat customizable drytower to house silica gel pellets. It uses a table tennis ball as float to prevent backflow of ambient air. I plan to use this device to keep ambient moisture out of an unpressurized liquid nitrogen…
Box for airgun pellets in the shape of JSB Exact Diabolo. The box can hold approximately 200 pcs of airgun pellets.
i got bored from normal pellets, so i created 2 types of pellets, one with a drill head, another with a hard pointy head
I felt the Anycubic Air Purifier carbon section was pretty meager in its capacity, so I enlarged it. I also made it to hold carbon pellets, instead of needing to rely on proprietary filters.
I made these so I would not forget what flavour I had in my pellet hopper. You can clip them to the top lip or handle of your bucket and then when you add those pellets to your grill you move tag to hopper. Printed at 25% with no supports.
