VZBOT Pinda Probe mount short and long version.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a mount for my vzbot 330 printhead with a pinda probe v2 8mm. its made for the all-metal X-carrage.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
V.2 Since i upgraded to the Goliath hotend i need to make some changes.
its now suitable for the Long and Short version of the fanducts.
V.1 suited with Mosquito magnum+ hotend its made for the all-metal X-Carrage. it can be used for the vzbot 235 and 330 printhead.
easy to remove the singel hole of the probe mount line's up with the hole of the righter fan ducht hole, so easy to mount and the buttom two holes lines up with the 2 middel holes of the bottom plate of the X-Carrage
Printed in ABS+ Black
100% infill 4 walls.
Back side
- used 2x m3x10mm
- used 2x m3 nuts.
Backside hole for fanduct:
- 1x m3x16mm
Bottom side :
-2x m3x6mm counter sink bolts.