1 / 3
Infimech TX aux blower fan V2 - with hepa filter — image 1
1 / 3

Infimech TX aux blower fan V2 - with hepa filter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Uses same fan and duct as V1. Adds better housing and hepa filter

Rating
0 / 5
Likes
12
Downloads
36
Makes
0
Views
678
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Full housing for 120mm fan and adds the ability to have a HEPA recirculation filter. Takes GL-2103 filters like these.  can be run as aux blower, aux blower with HEPA, or just HEPA recirculation with fan duct removed. I am told the duct will print without supports ymmv

Instructions

Press 3 x m3 heatsets into 3 outer holes on fan body

assemble housing

place fan in housing face down and slide back on

Put one short m2 pan head bolt in bottom right corner and loosely put 15mm-ish bolts on other 2 corners to locate

Remove 2 long bolts and use them to bolt to back of machine

Install HEPA filter as needed