Sovol SV06 Plus bed cable manager
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This add-on guides the bed cable such that it protrudes less from the back of the printer. It also prevents cable wear.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 88
- Makes
- 3
- Views
- 522
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Print instructions
- Material: I used PLA (but PETG could also work)
- Layer height: 0.3mm
- Infill: 20%
- Perimeters: 3 or 4
- Support: Not needed
- Print orientation: Print as oriented in stl
Materials needed
- 2x M3x8 bolt
- 1x M4x8 bolt
- 1x M4 self-locking T-nut (needed to secure guide to extrusion
- 2x zip tie for securing cable to guide
Assembly
Screw cable holder and mount together using the 2 M3 screws. The holes in the mount should be self-tapping. Mount the cable guide onto the frame using the self-locking T-nut and M4 bolt. Secure the bed cable to the guide using 2 zip ties. Move the bed forward and backward to check it is running smoothly and the cable is not dragging on anything.
I am not responsible for cable damage due to improper use of this mod. You Sovol bed cable might look different from mine. Please don't use this mod if you see your cable getting pinched or damaged by scraping over the model every time the bed moves.