1 / 2
15g Zaunkoenig M2K/M3K mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replaces the "lobster" (the plastic bit that connects the PCB to the carbon fibre shell) on an MxK.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 63
- Makes
- 0
- Views
- 986
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
use two T6 M2 screws (the screws used for height adjustment on the MxK) to screw the PCB onto the part
use three T6 M2 screws, (the screws used to screw the MxK bottom shell into the MxK carbon fiber shell) two screws to connect the two holes in the printed part into the MxK shell, and use one in the hole at the back of the PCB to connect to the MxK shell.
for more mods, check out https://zephyrmice.com/.
I'm not responsible if you break your stuff