13 models
STEP file for the PCB of the Zaunkoenig M3K. This file is not intended to be printed out. It is intended to help you design a gaming mouse shell for the M3K PCB. A few notes about the screws used for the M3K PCB (identical to the M2K…
no support required, print shell with main buttons on the build plate. Check out this Starlight shell for the PCB: https://www.printables.com/model/798266-zaunkoenig-m3k-shell-the-warthog-23g-total
Hiii this is my fan-made Zeromouse. Dimensions: 82.22 x 65.94 x 23.08 (mm) Must be used for Zaunkoenig M3K/M2K pcb nothing else will work/fit in. In order to make this mod you will need: -A well tuned 3d printer. (100% INFILL) -1x…
fingertip mouse mod for small hands, using m3k/m2k internals. basically just the original no mouse with holes in the clicks, and shorter to make you not have to stretch your fingers includes 2 files, ver1 being the first model of it i…
A print to test out the shape before buying the shell here: https://www.printables.com/model/798266-zaunkoenig-m3k-shell-the-warthog-23g-total
use two T6 M2 screws (the screws used for height adjustment on the MxK) to screw the PCB onto the part use three T6 M2 screws , (the screws used to screw the MxK bottom shell into the MxK carbon fiber shell) two screws to connect the two…
WIP for my M3K modkit, weight comes in under 13g once the cable is plugged in. Will be updating this soon, as it's a mish mash of bit designed for other modkits.
If you're not good at diy, I'd recommend enlarging the enclosure by 10-20% and reworking the internals for easy pcb moun Don't forget to download the pcb model 👇 Gilmouse 模块化鼠标 PCB Mod 套件 – 吉尔摩设计
print 2x. Threaded holes sized for M4(0.7)x20 bolts to make tapping easier. Must be tapped though or you'll have a bad time. Print sideways on its edge for maximum strength with some post work required, standing on its end (default) for…
STEP file for the PCB of the Zaunkoenig M3K. This file is not intended to be printed out. It is intended to help you design a gaming mouse shell for the M3K PCB. A few notes about the screws used for the M3K PCB (identical to the M2K…
Printing No support required! print it upright on the flat spot on the back. Line width of 0.4mm recommended PLA recommended No infill NOTE: if your printer is not capable of bridging ~56mm support will be required, but give it a shot…
Printing Print it upright on the back, support is only required for the bottom to keep it up Line width of 0.4mm recommended PLA recommended No infill NOTE: if your printer is not capable of bridging ~56mm support will be required for…
Printing No support required! print it upright on the flat spot on the back. Line width of 0.4mm recommended PLA recommended No infill NOTE: if your printer is not capable of bridging ~56mm support will be required, but give it a shot…
