1 / 2
Levelling foot for Hisense tumble dryer — image 1
1 / 2

Levelling foot for Hisense tumble dryer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adjustable levelling foot for Hisense tumble dryers, and many other brands.

Rating
0 / 5
Likes
3
Downloads
35
Makes
0
Views
175
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I made this to replace a few lost levelling feet for my Hisense dryer after finding out they're about €10 a piece, which is more than I am willing to pay for a piece of plastic. 

I made it for the one I have (DHGA8013L), but while researching I found it fits many other dryers as well, Hisense, as well as many other brands.

It's basically this part, or this part, so check those out for a list of possible machines this fits. I've provided two versions, one with a solid foot, and one with some cavities, because both of those variants seem to be sold (IO have the ojne with the cavities that came with my dryer)

I printed it in ASA, but it should also work well in ABS, or PETG. I do not think PLA will be a good choice, because it will likely creep under the weight of the dryer, and fail after a while. Do print it with a brim, because there is not a lot of surface to stick to the bed (I found I definitely needed the brim for ASA). 

I printed with 100% infill, and I suggest you do too if you plan on this part lasting a while.

I've provided a STEP file and an STL file to use directly in your slicer. 

If you'd like to modify the model, I made it in Onshape, and the original file can be found here in their public cloud. You will need an Onshape account: they're free and definitely worth every penny.

 

Tags