RF4 RF-H2 Hot Air Rework Station Nozzle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nozzle holder for the RF4 RF-H2 hot air rework station that mounts to the back of the unit.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 39
- Makes
- 1
- Views
- 296
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I recently purchased the RF4 RF-H2 hot air rework station and needed somewhere to store the additional nozzles. I figured directly attached to the unit was the best place to keep everything together :)
This is a holder for the nozzles that come with the RF4 RF-H2 hot air rework station. The holder mounts to the back of the unit using two M3x6 screws replacing the two screws that hold the unit together.
I printed mine with 30% cubic infill and 3 perimeters without supports in ASA. Any material should work fine for this model.
If you make one, please remember to share a make on Printables!