1 / 3
RF4 RF-H2 Hot Air Rework Station Nozzle Holder — zdjęcie 1
1 / 3

RF4 RF-H2 Hot Air Rework Station Nozzle Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A nozzle holder for the RF4 RF-H2 hot air rework station that mounts to the back of the unit.

Ocena
5 / 5
Polubienia
9
Pobrania
39
Wydruki
1
Wyświetlenia
296
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I recently purchased the RF4 RF-H2 hot air rework station and needed somewhere to store the additional nozzles. I figured directly attached to the unit was the best place to keep everything together :)

This is a holder for the nozzles that come with the RF4 RF-H2 hot air rework station. The holder mounts to the back of the unit using two M3x6 screws replacing the two screws that hold the unit together.

I printed mine with 30% cubic infill and 3 perimeters without supports in ASA. Any material should work fine for this model.

If you make one, please remember to share a make on Printables!

Tagi